• We produce superb museum quality resin coated giclée prints on Epson 350gsm Premium Satin Canvas, mounted on board.
• The print is coated in a clear, non-aging, extremely resilient resin having a high gloss 'mirror like' finish.
• All are produced using Epson Surecolour giclée professional printers at an extremely high definition 2,880 dpi using lightfast pigmented inks.
• All of the intricate fine detail of the original artwork is accurately reproduced to the highest quality.
• All image formats are supported.

Before You Order

Please carefully read the additional information sections below and if in doubt, contact us to discuss your requirements.

The size listed is the media size.

If you are able, size the digital image to the exact size required in mm.

Ensure that the digital image size required fits within the media size on both dimensions.

If an intermediate size is required, select the larger size.

If the image is not sized, the image will be printed as large as possible within the media size without cropping.

If the image is not sized and a specific image size is required, contact us to let us know.

The canvas prints are first dry mounted onto board at high temperature in a vacuum press to ensure permanent adhesion, extra rigidity and support.

The largest ~A0 prints are slightly smaller at ~ 122cm x 81cm (47" x 32") due to vacuum hot press limitations.

The sides of the board may be coloured in a single colour ink when unframed or a panel tray frame. Contact us if this is required.

• Resin prints on 3mm ACP may be hung unframed with either panel hanging plates or a rear sub-frame, for a minimalist, modern appearance. Or framed in an aluminium contemporary panel tray frame, for a more sophisticated appearance.
• Resin prints on 6mm MDF may be framed in a wooden contemporary panel tray frame, for a more sophisticated appearance.
• 12mm MDF is also available. Contact us for details.

All resin prints are borderless. If the image has a different aspect ratio from the media, the media will be cut to the media size.

A 3mm bleed is required, which means that up to 3mm of the image is lost from the edges when printing. If this cannot be tolerated, the image must be extended by 3mm. We are able to do this upon request.

The finished prints are waterproof hence glazing is not required and the surface may be dusted and wiped clean as admirers will definitely touch the surface!

We print all images exactly as received and match each print as closely as possible to the image as displayed on our computer screen.

We are able to provide A4 proofs on paper upon request and this is recommended if colour, tone and contrast are particularly critical.

We are able to edit images to crop, extend into a bleed or border, remove blemishes and make colour / brightness / contrast changes upon request and at a nominal charge.

Contact us to discuss any editing required.

We print all images exactly as received and match each print as closely as possible to the image as displayed on our computer screen.

We are able to provide A4 proofs on paper upon request and this is recommended if colour, tone and contrast are particularly critical.

We are able to edit images to crop, extend into a bleed or border, remove blemishes and make colour / brightness / contrast changes upon request and at a nominal charge.

Contact us to discuss any editing required.

If you would like to discuss framing options, contact us to discuss.

All resin prints are easy to clean using soapy water or an ammonia free glass cleaner.

Contact us at info@ryoung-art.com to discuss any aspect of the above pertaining to your order.